![]() ![]() If your system is running in Legacy mode, you should do the following steps on all the Volumes of the main disk. ![]() Now, continue below to either "Legacy" or "UEFI". If you cannot find this entry, the system is installed in the Legacy mode. In the right side of the window, you should see the BIOS MODE entry, which has the correct mode ( Legacy or UEFI) as its value. Type msinfo32.exe and press the Enter key to open the System Information window. To do this, please click on the Windows symbol in the bottom left corner, or press the Windows or Super key. Now you have to determine if your system has been installed in Legacy Mode, or in UEFI Mode. Please also select the other drive which you would like to use for the RAID1. In the dialog that then appears, the main drive should already be selected. Right-click on the disk which currently contains the operating system and click on Convert to dynamic disk. If your second disk already has Volumes on it, please right-click on them and choose Delete Volume on all of them. D: Unallocated space on the second disk.C: Volumes (means partitions under Windows) on the main disk.B: Second disk, intended to be used for the RAID1 mirroring.A: Main disk, which contains the operating system.Please find a quick overview of the utility below: Type diskmgmt.msc and press the Enter key to open the Disk Management Utility. Preparationįirst, please click on the Windows symbol in the bottom left corner, or press the Windows or Super key. So this guide is just intended for custom Windows installations. Servers which have been installed using our automatic Windows installation (available via Robot), or ordered with the Windows addon, already have a RAID level 1 configured and running on them. The following guide describes how to manually setup a drive mirroring (RAID1) in a Windows operating system. Windows Server Software RAID Last change on ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |